To truly get the most out of your Rexing DT2 dual channel 1080p front and rear dash cam, you’ll want to install it correctly, making sure both cameras have a clear view and all those cables are neatly tucked away. Think of it like giving your car an extra set of eyes – one looking forward, and another watching your back. This setup is crucial for peace of mind on the road, offering solid proof in case of an accident or unexpected incident. With more and more drivers realizing the benefits, about 16% of American drivers now own dash cams, and a significant 20% of those owners have actually used their footage for an insurance claim. That’s a pretty strong case for getting yours set up right!
A proper installation isn’t just about sticking a camera to your windshield. it’s about seamlessly integrating it into your vehicle so it’s always ready to record, without distracting you or looking messy. We’ll walk through everything, from picking the perfect spot to managing those wires like a pro, ensuring your Rexing DT2 is an unobtrusive guardian for your drives.
Why Even Bother with a Dash Cam?
Before we jump into the nitty-gritty of installation, let’s chat for a second about why a dash cam, especially a dual-channel one like the Rexing DT2, is such a must. It’s not just another gadget for your car. it’s a vital tool for your safety and protection.
- Undeniable Evidence: If you ever find yourself in an unfortunate accident, clear dash cam footage can be the definitive proof you need to show who was at fault. This can save you a lot of headache, time, and money with insurance claims. In fact, dash cam footage is now accepted by many insurers as evidence.
- Deterring Fraud and Vandalism: Ever heard of “crash for cash” scams? Dash cams can expose these fraudulent schemes, protecting you from becoming a victim. Plus, with parking mode which we’ll talk about with hardwiring, your DT2 can even record suspicious activity or vandalism when your car is parked.
- Peace of Mind: Knowing you have a reliable witness on board can significantly reduce stress levels while driving. A 2025 survey even found that 48% of dash cam owners reported reduced stress since installing one. That’s a huge benefit!
- Encouraging Safer Driving: For new drivers, reviewing footage can be a great way to identify and improve driving habits. For everyone, it’s a subtle reminder to be a careful and responsible driver.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Your Complete Guide Latest Discussions & Reviews: |
Getting to Know Your Rexing DT2 Kit
Alright, let’s unbox that Rexing DT2! You’ll want to make sure you have everything you need before you start. Typically, your Rexing DT2 package should include:
- The Rexing DT2 Front Dash Cam itself, with its neat 3″ LCD screen.
- A Rear Camera along with its dedicated cable.
- A Type-C Data Cable this is usually for transferring files, not for main power during driving.
- 3M Adhesive mounts.
- Some handy Cable Clips to help with management.
- The Car Charger this plugs into your cigarette lighter or 12V accessory port.
- A Cable Management Tool a trim removal tool – super useful!.
- The User Manual definitely give this a quick scan, it has some specifics!.
- A 32GB Micro SD Card it’s usually included, but you can upgrade to up to 128GB if you want more storage.
- An Electrostatic Sticker.
- Maybe even a Warning Sticker to deter potential mischief.
The DT2 records in Full HD 1080p at 30fps for the front camera and boasts a 170° ultra-wide-angle lens to catch a broad view of the road. It also has features like Wide Dynamic Range WDR for better image balance in various lighting, a G-Sensor to detect impacts, and Loop Recording so you never run out of space. For features like 24/7 parking surveillance, you’ll need a hardwire kit, which is typically sold separately.
Grab 50% OFF on RexingUSA.com Dylan Rexing Evansville IN: A Closer Look at the Man Behind Rexing Companies
Tools You Might Want to Grab
While the Rexing DT2 comes with some basic tools, having a few extra things on hand can make the job a lot smoother:
- Rubbing alcohol and a clean microfiber cloth: For properly cleaning your windshield.
- Plastic trim removal tools: Your kit might have one, but a set can be more versatile for prying open interior panels without damage.
- Zip ties or extra cable clips: For extra secure cable management.
- Multimeter/Circuit Tester if hardwiring: Essential for finding suitable fuse slots.
- Fuse taps if hardwiring: These safely connect your dash cam to the fuse box.
- Pliers or fuse puller if hardwiring: To remove fuses safely.
Your Pre-Installation Checklist
Before you start sticking things down, a few quick checks can save you a lot of hassle.
- Test the Device: Don’t skip this! Plug your front and rear cameras into the car charger, power them up, and make sure everything is working as it should, including the rear camera feed on the front unit. This confirms your dash cam isn’t faulty before you fully install it.
- Format the SD Card: Even if it’s new, always format the included Micro SD card within the dash cam itself. This ensures it’s optimized for recording and helps prevent issues later on. You can usually do this through the camera’s menu settings.
- Plan Your Placement Front Camera: Sit in the driver’s seat and find the best spot for your front camera. The sweet spot is usually behind your rearview mirror, centrally located to capture both sides of the road, and high enough not to obstruct your view. Also, make sure it’s within the sweep of your windshield wipers so rain doesn’t block the view.
- Plan Your Placement Rear Camera: For the rear camera, find a central spot on your rear windshield that gives a clear view out the back. Again, ensure it doesn’t block your vision.
- Trace Your Cable Route: Before tucking any wires, map out how you’ll run the power cable from the front camera to your power source cigarette lighter or fuse box and how the rear camera cable will get to the back. This helps you anticipate any tricky spots.
Step-by-Step Front Dash Cam Installation
let’s get that front camera mounted and powered! Unpacking the Reading Accent: A Blend of West Country Charm and London Buzz
1. Clean the Windshield
First things first, grab that rubbing alcohol and microfiber cloth. Thoroughly clean the area where you plan to mount the electrostatic sticker and the camera. Any dust or grime can prevent a good adhesion, and trust me, you don’t want your dash cam falling off mid-drive.
2. Apply the Electrostatic Sticker
The Rexing DT2 often comes with an electrostatic sticker. This is a thin, clear film that you apply to your windshield first. Peel off its protective film and carefully stick it onto your clean windshield in your chosen spot, usually behind the rearview mirror. This sticker actually helps the adhesive mount stick better and can protect your windshield from any residue if you ever remove the dash cam.
3. Attach the Adhesive Mount to the Camera
Take the 3M adhesive mount and attach it to the Rexing DT2 front camera itself. Make sure you orient it correctly so the camera will face the road properly once mounted.
4. Mount the Front Camera
Now, peel off the protective film from the 3M adhesive on the mount. Carefully position the camera with the mount attached onto the electrostatic sticker you just applied. Press firmly for about 30 seconds to ensure a strong bond. Some recommend waiting about 20 minutes for the adhesive to cure properly before moving on to cable routing.
5. Route the Front Camera Power Cable
This is where cable management comes in! The goal is a clean, factory-like look with no dangling wires. How to Easily Log In to Reading Eggs and Reading Eggspress (and What to Do If You Forget Your Password!)
- Start at the camera: Run the power cable upwards from the dash cam and tuck it into the gap between your headliner the fabric roof lining and the windshield.
- Along the headliner: Continue tucking the cable along the edge of the headliner, usually towards the passenger side, until you reach the A-pillar the pillar between your windshield and the front door.
- Down the A-pillar: Gently pull back the rubber weather stripping along the A-pillar. You can usually tuck the cable behind this strip and then push it into the gap between the A-pillar trim and the car frame. Use your trim removal tool to help with this. Crucially, avoid running the cable in front of or across any airbags that might be hidden in the A-pillar. Always route behind them.
- Under the dashboard: Once the cable reaches the bottom of the A-pillar, route it underneath the dashboard, either towards your cigarette lighter socket or your fuse box, depending on how you plan to power it.
Step-by-Step Rear Dash Cam Installation
Installing the rear camera follows a similar principle: discreet placement and hidden wires.
1. Mount the Rear Camera
Just like the front, clean a spot on your rear windshield where you want to mount the rear camera. It should be high enough for a clear view of the road behind you and ideally centered. Use its own adhesive mount to secure it.
2. Connect the Rear Camera to the Front Unit
The Rexing DT2’s rear camera gets its power and sends its video feed directly through the front unit. Take the long rear camera cable and plug one end into the rear camera port on your front dash cam.
3. Route the Rear Camera Cable
Now for the journey to the back of the car! Reading, England Weather: Your Ultimate Guide to Staying Dry (or Sunny!)
- From front camera to headliner: Route the rear camera cable upwards from the front dash cam and tuck it into the headliner, just like you did with the front power cable.
- Along the headliner driver or passenger side: Continue tucking the cable along the headliner all the way to the rear of your car. You can typically run it along the passenger side headliner, above the side doors.
- Down the C-pillar/D-pillar: When you reach the back of your car, pull back the weather stripping on the C-pillar the pillar by your rear passenger doors or D-pillar the pillar at the very back of an SUV/hatchback. Tuck the cable behind the trim, again being mindful of any side curtain airbags.
- To the rear camera: Once the cable is routed down to the bottom of the rear window, guide it to the rear camera. You might need to gently pry open some trim pieces around the rear window to get it perfectly hidden. Leave a little slack if your rear hatch moves.
Powering Your Rexing DT2
You have a couple of main options for powering your dash cam:
Option 1: The Cigarette Lighter Adapter Easiest
This is the simplest way to get power. You just plug the included car charger into your vehicle’s 12V cigarette lighter socket.
- Pros: Super easy, no special tools needed beyond what’s in the box.
- Cons: The dash cam will usually only turn on when your car’s ignition is on or the accessory port is active. If you want parking mode surveillance, this won’t work unless your 12V outlet is constantly powered which is rare. Plus, it ties up your cigarette lighter port.
If you go this route, make sure the cable is neatly tucked away from the A-pillar down to the cigarette lighter. You can run it under the glove compartment or along the center console trim.
Option 2: Hardwiring Kit For Parking Mode and Clean Install
For a cleaner, permanent installation and to enable the Rexing DT2’s 24/7 parking monitor feature, you’ll need a hardwire kit sold separately. The Rexing Smart Hardwire Kit Type-C is compatible with the DT2. This connects directly to your car’s fuse box. Reading, England: A Deep Dive into its Population
Here’s a simplified breakdown:
- Locate Your Fuse Box: Check your vehicle’s owner’s manual to find the fuse box location. It’s usually under the dashboard, in the glove compartment, or sometimes in the trunk.
- Identify Fuse Types: You’ll need to find two types of fuses:
- Constant 12V Battery Power: This fuse is always “hot,” providing power even when the car is off. This is for the parking mode.
- Accessory/Ignition 12V ACC Power: This fuse is only “hot” when your car’s ignition is on. This tells the dash cam to start normal recording when you drive.
- Use a multimeter/circuit tester to safely identify these.
- Connect the Hardwire Kit: A Rexing hardwire kit typically has three wires:
- Red wire: Connects to a constant 12V fuse using a fuse tap.
- Yellow wire: Connects to an ACC/ignition 12V fuse using a fuse tap.
- Black wire: This is your ground wire. Connect it to a bare metal bolt or screw on your car’s chassis make sure it’s a good ground point, not just bolted to plastic!.
- Always use proper fuse taps – never just poke wires into the fuse box.
- The Rexing hardwire kit also has low voltage protection, meaning it will cut power to the dash cam if your car battery voltage drops too low e.g., to 11.8V, preventing a dead battery.
- Connect to Dash Cam: Plug the hardwire kit’s Type-C connector into the front dash cam.
- Test Thoroughly: After everything is connected, turn your ignition on and off to ensure the dash cam powers on and off correctly and transitions into parking mode if enabled.
Initial Setup and Testing
Once everything is physically installed and powered up, it’s time for the digital setup:
- Power On and Confirm Recording: Start your car. The DT2 should automatically power on and begin recording.
- Adjust Camera Angles: Check the live view on the DT2’s screen. Adjust the front camera’s angle so it captures roughly 60% road and 40% sky for the best view, making sure traffic lights are visible. For the rear camera, ensure it captures a clear, unobstructed view behind you.
- Set Date and Time: This is crucial for accurate evidence. Go into the dash cam’s menu settings and set the correct date and time.
- Review Basic Settings: Familiarize yourself with other settings like loop recording duration, G-sensor sensitivity, and WDR. The DT2 has different sensitivity levels for its G-sensor Low, Medium, High to detect impacts.
Troubleshooting Common Issues
Even with the best intentions, you might hit a snag. Here are a few common issues and how to fix them: Reading Eggs Homeschool: Your Go-To Guide for Making Reading Fun!
- Dash Cam Not Powering On:
- Check connections: Ensure all power cables are securely plugged in.
- Cigarette lighter: Test the socket with another device to make sure it’s working.
- Hardwire kit: Double-check fuse taps, fuse integrity, and ground connection. Use your multimeter to verify power at the fuse box.
- Rear Camera Not Detected/Showing No Signal:
- Ensure the rear camera cable is fully plugged into both the front and rear cameras. A loose connection is a common culprit.
- Sometimes the cable might be damaged during routing. check for kinks or pinches.
- Poor Video Quality/Blurry Footage:
- Clean the lenses: Dust, smudges, or fingerprints can drastically reduce quality. Clean both front and rear lenses with a microfiber cloth.
- Check film: Make sure no protective film is still on the lenses.
- SD card: A low-quality or faulty SD card can cause recording errors or poor quality. Ensure it’s a Class 10/UHS-1 card or higher and try formatting it again, or even swap it for a new one.
- Windshield condition: A dirty or damaged windshield can impact video quality.
- Parking Mode Not Working with hardwire kit:
- Verify both constant and accessory power connections in your fuse box using a multimeter.
- Ensure the hardwire kit is compatible with the DT2 and its parking mode features.
- Check your dash cam settings – some hardwire kits might require the dash cam’s internal parking mode setting to be off for the kit’s intelligent parking mode to function correctly.
Maintaining Your Dash Cam
A little regular care goes a long way to ensure your Rexing DT2 keeps protecting you.
- Regularly Clean Lenses: Every few weeks, give both the front and rear camera lenses a gentle wipe with a microfiber cloth to keep footage clear.
- Periodically Format the SD Card: This is super important! Over time, SD cards can accumulate fragmented data, which can lead to recording errors. Formatting it every month or so after backing up important footage! keeps it healthy and optimized. The Rexing DT2 supports up to 128GB Micro SD cards, so you’ll have plenty of space, but still, routine formatting is good practice.
- Check Cable Connections: Occasionally, give your visible cables a quick check to ensure they haven’t come loose or aren’t dangling, which could be a safety hazard or cause connection issues.
Frequently Asked Questions
What kind of SD card does the Rexing DT2 use, and what’s the maximum size?
The Rexing DT2 uses a Micro SD memory card. It requires a Class 10/UHS-1 or higher card and supports capacities up to 128GB. It usually comes with a 32GB card in the box.
Does the Rexing DT2 record when the car is parked?
Yes, the Rexing DT2 has a Parking Monitor feature, but to activate it for 24/7 surveillance, you need to connect it with a Rexing Smart Hardwire Kit or an Intelligent Hardwire Kit, which is sold separately. Without the hardwire kit, it will only record when the car’s engine is on if powered via the cigarette lighter, unless that specific outlet is constantly powered. Unlocking the Magic of Electrostatic Stickers: Your Ultimate Guide
Where is the best place to mount the front dash cam?
The most recommended spot is behind your rearview mirror, in the center of your windshield. This position typically gives the camera a wide, clear view of the road without obstructing your driving vision. Ensure it’s within the sweep of your windshield wipers too, so rain doesn’t block the view.
How do I hide the cables for a clean installation?
The best way to hide the cables is to tuck them into the gaps between your car’s interior panels. Start by running the cable along the headliner the roof lining, then down the A-pillar the trim next to your windshield, and finally under the dashboard to your power source. For the rear camera, route the cable along the headliner all the way to the back and then down the C-pillar/D-pillar. Using a plastic trim removal tool helps neatly tuck the wires away.
Is hardwiring necessary, or can I just use the cigarette lighter?
No, hardwiring isn’t strictly necessary for the dash cam to function. You can absolutely use the included car charger and plug it into your cigarette lighter or 12V accessory port. However, hardwiring offers a cleaner, permanent installation and is required to enable the 24/7 parking monitor feature. If you don’t need parking mode and prefer an easier install, the cigarette lighter is perfectly fine.
What should I do if the dash cam gives an “SD Card Error”?
First, try formatting the Micro SD card directly through the dash cam’s settings menu. If the error persists after formatting, the card might be faulty or not compatible. Try using a different, high-quality Class 10/UHS-1 or higher Micro SD card, ensuring it’s from a reputable brand and formatted within the camera.
Can the Rexing DT2 record both front and rear simultaneously?
Yes, the Rexing DT2 is a dual-channel dash cam, meaning it records both the front and rear views at the same time. The footage from both cameras is saved to the same memory card. Rexing FMT2: Your Car’s Ultimate Tech Upgrade
Leave a Reply