To really get the most out of your Rexing dash camera, you’ve got to nail the mount. Trust me, I’ve seen too many people slap their dash cam anywhere, only to end up with shaky footage or a blocked view. A solid mount isn’t just about sticking it to your windshield. it’s about getting clear, reliable recordings every single time, making sure you stay safe and legal on the road. This guide is going to walk you through everything you need to know, from picking the right mount for your Rexing dash cam to getting it perfectly installed and even troubleshooting common hiccups. By the end of this, you’ll have your Rexing dash cam secured like a pro, giving you that peace of mind knowing your drives are perfectly documented.
Setting up a Rexing dash camera correctly is more than just a neat-looking car interior. it’s about peace of mind and protection on the road. A poorly mounted dash cam can give you blurry footage, fall off at the worst possible moment, or even block your view, leading to potential safety hazards and legal issues. The right mount, properly installed, ensures your camera captures crystal-clear evidence when you need it most, whether it’s for an accident claim or just recording a scenic drive.
Why Your Dash Cam Mount is a Big Deal
Think about it: your dash cam is your silent witness. Its ability to do its job relies entirely on where and how it’s mounted. If it’s constantly wiggling, aimed at the wrong angle, or falling off, then what’s the point?
- Clear Footage is Key: This might sound obvious, but if your mount isn’t stable, your footage will be shaky, and important details like license plates could be unreadable. A firm mount helps prevent camera shake, resulting in clear footage.
- Safety and Compliance: In many places, laws dictate where you can mount objects on your windshield to avoid obstructing the driver’s view. The last thing you want is a traffic ticket because your dash cam is in the wrong spot, or worse, causing a blind spot. A good mount ensures it’s out of your line of sight.
- Protecting Your Investment: Rexing dash cams are reliable tools, but they’re still electronic devices. A secure mount protects your camera from damage caused by drops or excessive vibration, extending its lifespan.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Mastering Your Rexing Latest Discussions & Reviews: |
Getting to Know Your Rexing Mounts: Types and What They Offer
Rexing offers a few different ways to attach your dash cam, each with its own perks and quirks. Knowing which one you have, or which one you need, is the first step to a perfect setup.
Suction Cup Mounts: The Flexible Friend
Most Rexing dash cams, like many other brands, come with or are compatible with Rexing dash cam suction mounts. These are super popular because they’re so easy to install and move around.
- Pros:
- Easily removable or adjustable: Great if you want to move your dash cam between different cars or just fine-tune its position.
- Good for temporary installations: Perfect if you’re not ready for a permanent solution.
- No residue: Leaves no sticky marks on your windshield.
- Cons:
- Can lose suction over time: Especially with temperature changes or extended use, the suction can weaken and might fall off. You’ll need to check its stability regularly.
- Less stable: Might experience more vibration compared to adhesive mounts, leading to slightly shakier footage on bumpy roads.
- Rexing models often using suction mounts: You’ll find Rexing dash cam suction mount options for models like the V1 series V1 Basic, V1-4K, V1P-4K, V3, V5, S1, and S3.
Adhesive Mounts: The “Set It and Forget It” Option
For a more permanent and secure fit, the Rexing dash cam adhesive mount is usually your best bet. These typically use 3M adhesive. Rexing Dash Cam Manual V3: Your Ultimate Guide to Setup, Settings & Solving Common Issues
* More stable and semi-permanent: Once it's on, it's really on. This helps prevent camera shake and gives you clearer footage, even on rough terrain.
* Less vibration: Offers a more stable setup that won't shift during long drives or due to temperature changes.
* Low profile: Many Rexing adhesive mounts are compact, maintaining clear visibility of the road.
* Harder to reposition: Once stuck, moving it can be a real hassle and might require replacement adhesive or even a new mount.
* Can leave residue: If you do remove it, you might need some effort to clean off the sticky residue.
- Rexing models often using adhesive mounts: These are common for many models, including V1 Basic, V1-4K, V1P-4K, V3, V3 Basic, V5, V5C, and S1 series.
Mirror Mount Kits: The Discreet Pro
If you want your dash cam to be practically invisible and seamlessly integrated, a Rexing dash cam mirror mount kit is an excellent choice. This mount attaches directly to your vehicle’s existing rearview mirror.
* Integrated and discreet look: It hides your dash cam almost completely, making it less noticeable from outside the car and keeping your windshield clutter-free.
* Minimal windshield obstruction: Doesn't take up any windshield space, which is great for visibility and complying with laws.
* Highly stable: Designed for ultimate stability, ensuring a firm, shake-free hold even on bumpy terrains, often more secure than a suction cup.
* Adjustable: Many kits offer 360-degree rotation, letting you capture exactly what you need.
* Specific to rearview mirror design: You need to make sure your car's rearview mirror stem is compatible with the kit.
* More involved installation: Might require a bit more finagling to get it just right compared to a simple suction cup.
- Rexing models compatible: Rexing offers mirror mount kits for models like the V1 Basic, V1-4K, V1P 3rd Gen, V1P Pro, V1 Max, V1P Max, V1P-4K, V3 Basic, and V3 Dash Cams. The Rexing M2 is also designed as a mirror dash cam.
Rexing Motorcycle Dash Cam Mount
While most Rexing mounts focus on cars, if you’re looking for a Rexing motorcycle dash cam mount, you’ll want to check for specialized mounts designed to withstand the unique vibrations and weather conditions a motorcycle experiences. Rexing does offer a “Bike Mount for Action Camera and Fishing Camera” which might be adaptable or specific motorcycle dash cam options like the MTC1. These often involve handlebar or frame attachment points, offering secure placement for motorcycle-specific cameras.
Step-by-Step Installation: Getting Your Rexing Dash Cam Secure
No matter which Rexing mount you have, a good installation starts with some universal prep work.
Universal Prep Steps: Don’t Skip These!
- Clean the Surface Thoroughly: This is crucial, especially for adhesive and suction mounts. Use rubbing alcohol and a clean cloth to wipe down the area where you plan to mount your dash cam. A clean, grease-free surface ensures the best grip.
- Choose the Perfect Spot: This is arguably the most important decision.
- Behind the Rearview Mirror: The best place for your front dash cam is typically high on your windshield, right behind your rearview mirror. This spot gives you a wide view of the road without blocking your line of sight. It also helps keep the camera discreet.
- Centered: Aim to mount it as centered as possible to maximize the viewing angle of both the left and right sides of your car.
- Within Wiper Range: Make sure the camera’s lens is within the arc of your windshield wipers so rain and dirt don’t obscure the view.
- Avoid Sensors and Tint: Don’t place it where it might block any vehicle sensors like those for automatic wipers or collision avoidance or directly on textured areas or sunshade tinting that can affect adhesion or visibility.
- Check Local Laws: Seriously, do a quick search for dash cam placement laws in your state or region. Some places, like Alabama, prohibit windshield mounting entirely and require dashboard placement. Knowing the rules beforehand can save you a headache later.
Installing a Suction Cup Mount
This is generally the quickest and easiest method for your Rexing dash cam suction mount. Rexing V33 Dash Cam: Your Ultimate Guide to Setup, Settings, and Troubleshooting
- Prepare the Mount: Make sure the locking lever on the suction cup is in the “up” or unlocked position.
- Press and Lock: Firmly press the suction cup against the cleaned windshield surface. While maintaining pressure, rotate the mount’s lever downward to lock it securely in place. You should feel it “grab” the glass.
- Test Stability: Gently try to move the mount. It should feel solid. If it wiggles or comes loose, try repositioning it or re-cleaning the surface.
- Attach Camera: Slide your Rexing dash cam onto the mount’s bracket. You’ll usually hear a satisfying “snap” when it’s properly seated.
Installing an Adhesive Mount
For your Rexing dash cam adhesive mount, patience is a virtue!
- Attach Adhesive to Mount: If your mount and adhesive come separately, peel one side of the protective film from the 3M adhesive pad and firmly apply it to the designated area on the mount. Make sure it’s as neat as possible.
- Consider Electrostatic Film Optional but Recommended: Some Rexing dash cams, especially newer models like the V55 or V33, come with an electrostatic film. If you have this, apply it to the cleaned windshield first before sticking the adhesive mount. This helps protect your windshield and makes removal much easier if you ever need to.
- Position and Press: Once you’ve chosen your final spot and applied electrostatic film if using, peel the other side of the protective film from the adhesive pad. Carefully align the mount and press it firmly against the windshield for about 30 seconds. Apply even pressure.
- WAIT! This is key: This is where many people mess up. Let the adhesive set for at least 20 minutes, but ideally several hours or even overnight, before attaching your dash cam. This allows the adhesive to form a strong, secure bond. Attaching the camera too soon puts stress on the fresh adhesive and can lead to it falling off later.
- Attach Camera: Once the waiting period is over and the adhesive is firm, slide your Rexing dash cam onto the bracket of the mount. Ensure it clicks or slides securely into place.
Installing a Mirror Mount Kit
A Rexing dash cam mirror mount kit usually involves a bit more custom fitting.
- Identify Compatibility: First, double-check that the kit is compatible with your specific Rexing dash cam model and your car’s rearview mirror design. Most kits come with various joints to fit 95% of dash cams and rearview mirrors.
- Attach to Mirror: Secure the mount’s clamp or straps around the cylindrical stem of your rearview mirror. Tighten it until it feels firm and doesn’t wiggle.
- Attach Camera: Slide your Rexing dash cam onto the mount’s attachment point.
- Adjust Angle: Utilize the mount’s 360-degree rotation feature to adjust your dash cam to the perfect recording angle.
Attaching the Dash Cam to the Mount and Adjusting Angle
Once the mount is securely in place, the final step is to attach your Rexing camera and fine-tune its view.
- Secure the Camera: Whether it’s sliding it into a slot until it clicks for a Rexing V1 dash cam mount or a Rexing V3 dash cam mount, or attaching it to a mirror mount, make sure it’s snug and won’t wobble.
- Adjust the Lens Angle: This is critical for getting good footage. The optimal angle typically captures about 60% road and 40% sky. Make sure the camera isn’t aimed too high missing important road details or too low capturing too much of your dashboard. Many Rexing cameras have adjustable lenses for this.
- Pro Tip: Turn on your dash cam and check the live view on its screen or via the Rexing app on your phone to confirm the angle is perfect.
The Art of Cable Management: Keeping it Clean and Safe
Nobody wants a tangled mess of wires blocking their view or looking unsightly. Proper cable management is essential for both aesthetics and safety. Rexing Dash Cam Review: What the Buzz is All About (and What You Should Really Know)
- Route Along the Headliner: Start by tucking the power cable into the gap between your car’s headliner the fabric ceiling and the windshield.
- Down the A-Pillar: Continue routing the cable down the A-pillar the vertical support between your windshield and front side window. You can gently pull back the weather stripping the rubber seal around the door frame and tuck the cable inside, or use a plastic trim tool often included with Rexing dash cams to push the cable into the panel gaps.
- Along the Dashboard/Kick Plate: From the A-pillar, you can run the cable along the edge of the dashboard, continuing down to the kick plate the panel near your feet.
- To the Power Source: Finally, route the cable to your power source. This is typically the cigarette lighter socket, or if you’ve hardwired it, to your fuse box.
- Cigarette Lighter: This is the easiest. Just plug it in and secure any excess cable.
- Hardwiring: For a cleaner look and features like parking mode, you might hardwire your dash cam. This involves connecting to your car’s fuse box, often using an add-a-fuse kit. If you’re not comfortable with car electrical systems, consider having a professional do this.
- Rear Camera Cable: If you have a two-channel system like the Rexing V3 or V5, route the rear camera cable similarly, along the headliner, then down the side pillars and to the back windshield.
Important Safety Note: Always avoid running cables where they could interfere with airbags, pedals, or other safety features.
Troubleshooting Common Mounting Woes
Even with the best intentions, you might run into some issues. Here are a few common problems and how to tackle them:
- My Mount Keeps Falling Suction Cup: This is a classic.
- Solution: First, re-clean the windshield thoroughly with rubbing alcohol. Make sure the glass is completely dry. Press the suction cup firmly and ensure the locking lever is fully engaged. Extreme temperatures can weaken suction, so check it regularly. If it’s a persistent problem, you might need a Rexing dash cam mount replacement of the suction cup, or consider upgrading to an adhesive mount for more reliability.
- Shaky Footage: If your recordings look like you’re on a roller coaster, your mount might not be secure.
- Solution: Check that the camera is tightly attached to the mount and that the mount itself isn’t wiggling on the windshield. If it’s a suction cup, try re-seating it. If it’s an adhesive mount, ensure you waited the full setting time. Sometimes, the problem could be a faulty mount that needs replacing. Adhesive mounts generally offer better vibration resistance.
- Camera Angle is Off/Won’t Stay in Place: You set it perfectly, but now it’s pointing at the sky or your hood.
- Solution: Many mounts have a tightening nut or ball joint. Loosen it slightly, adjust the camera to the desired angle, and then tighten it firmly. Don’t overtighten, but make it snug. If the mount itself is loose, that could also cause this issue. Ensure your Rexing dash cam mounting bracket allows for proper angle adjustment.
- Obstructed View or Legal Concerns: You mounted it, and now you’re worried it’s in the way or breaking the law.
- Solution: The ideal spot is behind the rearview mirror. If your initial placement is problematic, you might need to try a different spot. For adhesive mounts, this means potentially getting a new adhesive pad or mount, or using an electrostatic film next time to allow for easier repositioning. Always prioritize your line of sight.
Maintaining and Replacing Your Rexing Mount
Even the best mounts won’t last forever. Regular maintenance can extend their life, but sometimes a replacement is necessary. Rexing dt2 dash cam smart hardwire kit
- Regular Checks: For suction cup mounts, periodically check their stability and re-press them to the windshield, especially during extreme temperature changes. For all mount types, make sure the camera is still securely attached to the bracket.
- When to Replace: If your mount consistently fails, breaks, or you simply want a different type e.g., switching from suction to adhesive, it’s time for a replacement. A Rexing dash cam mount replacement is usually easy to find.
- Where to Find Replacements: You can typically buy replacement mounts directly from RexingUSA.com, or check major retailers like Best Buy and online marketplaces like Amazon and eBay. Just be sure to get a mount that’s compatible with your specific Rexing dash cam model e.g., a V1 mount for a V1 camera.
Getting your Rexing dash cam mounted perfectly might seem like a small detail, but it makes a massive difference in the performance and reliability of your device. By understanding the different mount types, following careful installation steps, and knowing how to troubleshoot, you’ll ensure your dash cam is always ready to record, giving you clear, dependable footage every time you hit the road. Drive safe, and keep those cameras rolling!
Frequently Asked Questions
Where’s the absolute best spot for my front Rexing dash cam?
The best place to put your front Rexing dash cam is usually high on your windshield, right behind your rearview mirror. This spot typically gives you the widest, clearest view of the road ahead without blocking your line of sight, and it also keeps the camera nice and discreet. Just make sure it’s within the sweep of your windshield wipers and doesn’t interfere with any car sensors.
How long does the adhesive mount really need to set?
For a Rexing adhesive mount, you really need to let it cure for a while. After you press the mount firmly onto the windshield, it’s highly recommended to wait at least 20 minutes, but ideally several hours or even overnight, before you attach your actual dash cam. This allows the 3M adhesive to form the strongest possible bond, preventing it from falling off later. Your Complete Guide to Rexing Dash Cam Installation
Can I move my adhesive mount if I mess up?
Moving an adhesive mount isn’t easy once it’s stuck. 3M adhesive is designed to be pretty permanent. If you’ve just put it on and realized it’s in the wrong spot, you might be able to carefully peel it off, but you’ll likely need a new adhesive pad or a replacement mount for a secure re-installation. Using an electrostatic film before applying the adhesive can make future removal easier.
Are Rexing suction cup mounts reliable in hot weather?
Rexing suction cup mounts, like most suction cups, can sometimes lose their grip in extreme hot or cold weather conditions. The material can expand or contract, breaking the vacuum seal. To help prevent this, ensure the windshield is super clean before mounting, and if you live in a very hot climate, try to park in the shade or consider an adhesive mount as a more stable alternative. Regularly re-pressing the suction cup can also help maintain its hold.
What Rexing models are compatible with the mirror mount kit?
Rexing’s Dash Cam Mirror Mount Kit is designed for a good range of their cameras. It’s compatible with popular models like the V1 Basic, V1-4K, V1P 3rd Gen, V1P Pro, V1 Max, V1P Max, V1P-4K, V3 Basic, and V3 Dash Cams. These kits often come with various joints to ensure broad compatibility with both different Rexing cameras and car rearview mirror designs.
Why is my Rexing dash cam footage shaky even after mounting it firmly?
Shaky footage, even with a firm mount, can be super frustrating! First, double-check that your camera is snapped perfectly into its mounting bracket – sometimes it might seem secure but isn’t fully seated. If that’s good, then the issue might be with the mount itself, perhaps a slight defect, or it’s simply not robust enough for your vehicle’s vibrations. Adhesive mounts typically offer better stability and vibration resistance than suction cups. If the problem persists, a Rexing dash cam mount replacement or trying a different mount type could help.
Do I need special tools to install a Rexing dash cam mount?
For most standard Rexing dash cam mounts suction cup or adhesive, you usually won’t need specialized tools for the mount itself. You’ll want a clean cloth and rubbing alcohol for cleaning the windshield. For cable management, a plastic trim tool often included with Rexing dash cams is super helpful for tucking wires neatly into crevices, but you can often manage with just your fingers. If you decide to hardwire your dash cam, you’ll need an add-a-fuse kit and basic electrical tools, but that’s a more advanced power installation, not typically for just the mount. Unlocking Your Rexing DT2 Dash Cam: A Full Guide to the Rexing Connect App
Leave a Reply