Unleash 24/7 Protection: Your Guide to the Rexing Intelligent Hardwire Kit Type-C
If you want to unlock your Rexing dash cam’s full potential for round-the-clock protection, you’re going to want to check out the Rexing Intelligent Hardwire Kit Type-C. Seriously, this isn’t just some fancy cable. it’s the key to making sure your car is always being watched, even when you’re not around. Forget about your dash cam turning off with your ignition – this kit ensures it stays powered, providing that crucial parking mode surveillance without draining your car’s battery.
Think about it: your dash cam is there to capture everything, right? But what about when your car is parked at the grocery store, at work, or overnight? That’s where a standard setup often falls short. This Rexing intelligent hardwire kit Type-C port steps in, offering a direct, clean, and reliable power source straight from your car’s fuse box. It’s designed to work with a bunch of Rexing dash cam models, especially those rocking a Type-C port, like the R4, DT2, M2 Max, R316 Series, RH2 Series, and even the CPDuo Multimedia Receiver.
It’s about more than just power, though. This kit brings some serious “intelligent” features to the table, particularly for parking mode. We’re talking about advanced motion detection that springs your dash cam into action the moment it senses something amiss around your vehicle. And the best part? It’s smart enough to protect your car battery from going flat, which is a common worry when you’re thinking about continuous recording. It automatically cuts power if your car’s battery voltage drops too low, typically around 11.8V or 23.5V depending on your vehicle’s system, so you’ll always have enough juice to start your engine.
So, if you’re ready to ditch the dangling wires from your cigarette lighter and embrace a truly integrated and protective dash cam setup, stick around. We’re going to walk through exactly what makes this kit so great, how to install it, and answer all those burning questions you might have.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Rexing intelligent hardwire Latest Discussions & Reviews: |
Why You Really Need a Hardwire Kit for Your Dash Cam
let’s be real, plugging your dash cam into the cigarette lighter port is simple, but it’s not ideal for full protection. When your car’s off, so is your dash cam. That means any bumps, scrapes, or even a full-on hit while parked? Gone. No recording. That’s a huge blind spot in your car’s security. Getting Started with Your Rexing Smart Hardwire Kit with Type-C Port: The Ultimate Guide
This is where a dedicated hardwire kit, like the Rexing intelligent hardwire kit, becomes an absolute game-changer. It directly connects your dash cam to your vehicle’s electrical system, usually through the fuse box. Here’s why that’s such a big deal:
- 24/7 Surveillance with Parking Mode: This is the big one. With a hardwire kit, your dash cam can stay powered even when your engine is off. This enables parking mode, which means it can constantly monitor your surroundings. The Rexing Intelligent Hardwire Kit, specifically, uses motion sensors to detect activity, waking up your camera and starting to record when something happens. This is way better than relying on simple impact detection, as it can catch approaching threats or suspicious activity before they even touch your car.
- Battery Protection: I know, the idea of your dash cam running all the time sounds like a recipe for a dead battery. But the Rexing Intelligent Hardwire Kit has low voltage protection built right in. If your car battery’s voltage drops below a safe level like 11.8V for a 12V system, the kit automatically cuts power to the dash cam. This ensures you’ll always have enough power to start your car. That’s peace of mind, right there.
- Clean, Discreet Installation: No one likes a messy dashboard. Hardwiring means you can route the power cable neatly along your car’s headliner and A-pillar, keeping it completely out of sight. This also frees up your cigarette lighter socket for other devices, like charging your phone.
- Automatic Operation: Once installed, you don’t have to think about it. Your dash cam will seamlessly transition between driving mode and parking mode, and power on/off with your car’s ignition or stay on for parking mode without you having to touch a thing.
What Makes the Rexing Intelligent Hardwire Kit Stand Out?
So, we’ve talked about hardwire kits in general, but let’s zero in on what makes the Rexing intelligent hardwire kit Type-C particularly cool.
- Intelligent Motion Sensing: This is the core “intelligent” part. Unlike some basic hardwire kits that rely solely on G-sensor impact detection for parking mode, this kit uses an external motion sensor. You can place this sensor to monitor inside the cabin or in front of your car. When motion is detected, it automatically powers up your dash cam and starts recording, ensuring you capture events before an actual impact. It’s like having an extra pair of eyes.
- Dual Port Compatibility Type-C and Mini USB: This kit is pretty versatile. While we’re focusing on the Type-C aspect, many versions actually come with both Type-C and Mini USB plugs. This means it’s compatible with a wide range of Rexing dash cam models, whether they’re newer ones with Type-C or older ones still using Mini USB. Just make sure to check your specific dash cam’s port.
- Robust Low Voltage Protection: As mentioned, this kit takes care of your car battery. It has a built-in smart low voltage protection system that monitors your battery. If it dips to 11.8V for 12V systems or 23.5V for 24V systems, it’ll cut the power to the dash cam. This saves your battery from being completely drained and leaves you with enough power to start your car. This is a critical feature, especially if you plan on using parking mode for extended periods.
- Wide Voltage Input: It’s designed to work with both 12V and 24V vehicle electrical systems, making it suitable for a wide range of cars, trucks, and other vehicles.
- Long Cable Length: With a cable length of about 13 feet, you usually have plenty of slack to route the wires discreetly around your windshield, along the A-pillar, and down to your fuse box without them being visible. This helps achieve that super clean look everyone wants.
- Everything You Need: The kit often comes with fuse tap cables and an installation crowbar, which is a nice touch to get you started without needing to buy extra tools.
Understanding Parking Mode with Your Rexing Intelligent Hardwire Kit
Alright, let’s clarify how parking mode works with this specific “Intelligent” kit, because it’s a little different from simply enabling “parking monitor” in your dash cam’s own settings.
When you install the Rexing intelligent hardwire kit Type-C, its external motion sensor takes over parking mode duties. This is important: you should NOT enable the parking monitor function in your dash cam’s settings once this kit is connected. Doing so can actually cause issues or prevent the intelligent features from working correctly.
Here’s the breakdown: The Ultimate Guide to Rexing Lock Video: Protecting Your Crucial Dash Cam Footage
- Vehicle Off: When you turn off your car’s engine, the intelligent hardwire kit’s motion sensing feature automatically activates.
- Motion Detected: If the external motion sensor detects movement around your vehicle, a blue indicator on the sensor will light up.
- Automatic Recording: The kit then powers up your dash cam, and it starts recording. This recording continues until the motion is cleared. This means if someone walks by, a car pulls up, or anything moves near your vehicle, your dash cam will capture it.
This approach means the dash cam isn’t constantly recording or waking up for every little vibration, which helps manage power consumption more efficiently and still provides robust security.
Step-by-Step Rexing Intelligent Hardwire Kit Installation Guide
Installing a hardwire kit might sound daunting, but it’s totally doable, especially with the right guidance. If you’ve got basic DIY skills, you can probably handle this. Rexing even has tutorial videos, which I highly recommend checking out if you’re a visual learner.
What you’ll typically need:
- Your Rexing dash cam and the Rexing intelligent hardwire kit Type-C
- Your car’s owner’s manual to locate the fuse box and understand its layout
- A circuit tester super helpful for finding the right fuses
- Pliers or a socket wrench for grounding
- Plastic trim removal tools to hide wires neatly
- Zip ties or cable clips for extra neatness, often included in the kit
Let’s get started:
Step 1: Plan Your Dash Cam Placement and Wire Routing
First things first, decide where you want your dash cam. Most people mount it behind the rearview mirror to keep it discreet and out of their line of sight. Make sure it has a clear view of the road. Powering Your Protection: A DIY Guide to Installing the Rexing Hardwire Kit for Your DT2 Dash Cam
Once the dash cam is mounted, plan the path for the power cable. You’ll want to route it along the top edge of your windshield, down the passenger or driver’s side A-pillar the trim piece between your windshield and side door, and then down to your car’s fuse box. Use the included trim removal tool to gently pry open gaps in the headliner and A-pillar trim to tuck the cable away.
Next, decide where to place the external motion sensor. You can position it on the top of the windshield a few inches from the dash cam to detect cabin motion, or on the backside of the rearview mirror for motion in front of the car. Just make sure it’s not blocked by anything.
Step 2: Locate Your Car’s Fuse Box
This is where your car’s owner’s manual becomes your best friend. Fuse boxes can be located in various places: under the dashboard driver or passenger side, in the glove compartment, or even in the engine bay or trunk. Find it and open it up.
Step 3: Identify Your Fuses Constant and Switched
This is crucial. Your hardwire kit has three wires you’ll connect to your car’s electrical system:
- Red Wire ACC/Ignition-Switched: This needs to connect to a fuse that only receives power when your car’s ignition is on.
- Yellow Wire Constant/Battery: This needs to connect to a fuse that is always live, even when your car is off. This is what powers your dash cam for parking mode.
- Black Wire Ground: This needs to connect to a metal bolt or screw that is part of your car’s chassis.
Using a Circuit Tester: Rexing Hardwire Kit Type-C: Your 24/7 Car Guardian
- Turn your car completely off and remove the key.
- Use the circuit tester to probe the metal terminals on top of the fuses in your fuse box. The ones that light up the tester are your constant fuses.
- Now, turn your car’s ignition to the ACC or ON position without starting the engine.
- Probe the fuses again. The ones that light up now and didn’t before, or were constant before that are related to accessories are potential switched fuses.
- Important: Avoid essential fuses like airbags, engine management, or ABS. Look for fuses for things like the radio, cigarette lighter, or power windows that match the amperage of the fuse taps provided often 10A or 15A.
Step 4: Connect the Hardwire Kit Wires
Most hardwire kits come with “add-a-circuit” or “fuse tap” adapters. These are awesome because they allow you to tap into an existing fuse slot without cutting any wires.
- For Constant Power Yellow Wire:
- Identify a suitable constant fuse.
- Remove the original fuse from that slot.
- Insert the original fuse into the bottom slot of an add-a-circuit adapter.
- Insert a new fuse matching the original’s amperage into the top slot of the add-a-circuit adapter. This new fuse protects your dash cam.
- Plug the add-a-circuit adapter into the empty fuse slot in your car’s fuse box.
- Connect the yellow wire from your hardwire kit to the wire coming off this add-a-circuit.
- For Switched Power Red Wire:
- Repeat the process for a suitable switched fuse, using another add-a-circuit adapter and connecting the red wire.
- Grounding Black Wire:
- Find a metal bolt or screw near the fuse box that’s attached directly to the car’s metal chassis.
- Loosen the bolt, place the hardwire kit’s black wire’s ring terminal under it, and tighten the bolt securely. Make sure it’s a good metal-on-metal connection, not on painted surfaces or plastic.
Step 5: Connect to the Dash Cam
Once your hardwire kit is connected to the fuse box and grounded, plug the Type-C or Mini USB, depending on your dash cam end of the hardwire kit into your Rexing dash cam.
Step 6: Test and Tidy Up
- Start your car. Your dash cam should power on and begin recording.
- Turn off your car. Your dash cam should transition into parking mode, indicated by a light or on-screen message refer to your dash cam manual for specifics. Test the motion sensor by walking around the car to see if it triggers recording.
- If everything works, use your trim tools to neatly tuck away all wires behind the headliner, A-pillar, and dashboard trim. Use the included cable hiding clips to secure any loose sections.
Tips for a Smooth Installation
- Read Both Manuals: Seriously, read your Rexing dash cam manual and the Rexing intelligent hardwire kit Type-C manual. They contain crucial information specific to your devices.
- Watch Videos: Visual guides can be incredibly helpful. Search for “how to hardwire Rexing dash cam” or “Rexing intelligent hardwire kit installation” on YouTube. RexingUSA often uploads official installation videos.
- Don’t Rush: Take your time, especially when working with your car’s electrical system.
- Double-Check Fuse Types: Cars use different fuse types Mini, ATO/ATC, Micro2. The Rexing kit usually includes various fuse tap cables, but it’s good to know what your car uses.
- Professional Installation: If you’re uncomfortable doing it yourself, a professional installer like those at Best Buy or a car audio shop can get it done quickly and cleanly.
Troubleshooting Common Issues
Even with the best instructions, sometimes things don’t go perfectly. Here are a few common issues and what to check:
- Dash Cam Not Powering On After Hardwiring:
- Check Fuse Connections: Ensure both the constant yellow and switched red wires are connected to active fuses, and that the fuses themselves are good. A circuit tester is great for this.
- Check Ground Connection: Make sure the black ground wire has a solid metal-on-metal connection to the chassis. Rust or paint can interfere.
- Verify Dash Cam Connection: Is the Type-C or Mini USB plug fully inserted into the dash cam?
- Parking Mode Not Working / Dash Cam Turns Off Completely:
- Constant Fuse: Re-check that your yellow wire is connected to a constant fuse – one that’s always live, even with the car off.
- Dash Cam Settings: Crucially, ensure you have NOT enabled the parking monitor function in your dash cam’s internal settings. The Intelligent Hardwire Kit overrides this.
- Motion Sensor Placement: Make sure the external motion sensor is properly connected and not blocked by anything.
- Car Battery Drains Too Quickly:
- Low Voltage Protection: While the kit has this built-in, if your car battery is old or weak, continuous parking mode might still stress it. Consider getting your car battery tested.
- Parking Duration vs. Driving: If you drive very little but use parking mode for long durations, your battery might not get enough charge. Daily driving recharges your battery. you typically need to drive enough to replenish the energy used by parking mode.
- Dash Cam Power Consumption: While minimal around 0.1-0.3 amps in parking mode, prolonged periods can add up.
Compatibility: Rexing Intelligent Hardwire Kit Type-C Port for All Rexing Dash Cam
Rexing has done a good job making this kit widely compatible with many of their dash cam models. The Rexing Intelligent Hardwire Kit Type-C Port which often includes a Mini USB option in the same kit is designed to work with a range of cameras.
Some of the specific models mentioned for compatibility include: Why a Hardwire Kit is a Must-Have for Your Dash Cam
- Rexing R4
- Rexing DT2
- Rexing M2 Max
- Rexing R316 Series
- Rexing RH2 Series
- Rexing CPDuo Multimedia Receiver
- Rexing M3, M2-4, M4-4, L4 Series are also mentioned for Type-C Smart Hardwire Kits, which are very similar in connection type.
Always double-check your specific dash cam model and its port type Type-C or Mini USB to ensure you have the correct hardwire kit. While this kit offers both, knowing your dash cam’s requirements beforehand is a good practice.
Rexing Intelligent Hardwire Kit vs. Rexing Smart Hardwire Kit: What’s the Difference?
You might have noticed Rexing offers both “Intelligent” and “Smart” hardwire kits. It can be a little confusing, but there’s a key distinction:
- Rexing Intelligent Hardwire Kit like the one we’re discussing: This kit’s standout feature is its external motion sensor. It uses this sensor to detect movement around your vehicle and then powers on your dash cam for parking mode recording. This means it’s actively looking for activity and proactively starting recordings.
- Rexing Smart Hardwire Kit: While these kits also provide continuous power and low voltage protection, they typically rely on the dash cam’s internal G-sensor gravity sensor or motion detection, which is often triggered by hard vibrations or impacts. Some “Smart Hardwire Kits” also specify ACC detection for switching between modes. They don’t usually come with a separate, external motion sensor.
So, the “Intelligent” kit offers a more advanced, proactive type of parking surveillance due to its dedicated motion sensor. If 24/7 motion-triggered recording is your top priority, the Intelligent Hardwire Kit is likely the one you want.
Frequently Asked Questions
What is the main benefit of the Rexing Intelligent Hardwire Kit Type-C?
The biggest advantage is enabling 24/7 parking surveillance for your dash cam. It powers your camera even when your car is off, using an external motion sensor to trigger recording when activity is detected around your vehicle, all while protecting your car battery from draining. Discovering the Beauty of Rexing Flowers: Your Guide to Local Blooms and Floral Joy
Is the Rexing Intelligent Hardwire Kit Type-C compatible with all Rexing dash cams?
It’s designed to be widely compatible with many Rexing dash cam models that use a Type-C port, including popular ones like the R4, DT2, M2 Max, R316 Series, RH2 Series, and CPDuo Multimedia Receiver. Some versions also include a Mini USB plug for broader compatibility. Always check your specific dash cam’s port type.
How does the low voltage protection work?
The kit has a built-in smart low voltage protection system. It constantly monitors your car battery’s voltage. If the voltage drops to a pre-set critical level e.g., 11.8V for a 12V battery or 23.5V for a 24V battery, the kit automatically cuts power to the dash cam. This ensures your car battery retains enough charge to start your vehicle.
Do I need to enable parking mode in my Rexing dash cam settings if I use this hardwire kit?
No, in fact, you should not enable the parking monitor function in your dash cam’s internal settings when using the Rexing Intelligent Hardwire Kit. This kit comes with its own external motion sensor that handles the parking mode detection and recording activation, overriding the dash cam’s internal function. Enabling it can lead to malfunctions.
What’s the difference between the Rexing Intelligent Hardwire Kit and the Smart Hardwire Kit?
The main difference is in how they detect events for parking mode. The Intelligent Hardwire Kit uses a dedicated external motion sensor to detect movement and trigger recording. The Smart Hardwire Kit, on the other hand, typically relies on the dash cam’s internal G-sensor impact detection or motion detection, without an additional external sensor.
Can hardwiring drain my car battery?
Without proper protection, yes, continuous recording can drain your battery. However, the Rexing Intelligent Hardwire Kit features built-in low voltage protection specifically designed to prevent this. It monitors your battery and cuts power to the dash cam before the voltage drops too low, ensuring you can always start your car. Hardwiring Your Rexing Dash Cam: A Full Guide to 24/7 Protection
What if I have a different fuse type in my car?
The Rexing Intelligent Hardwire Kit typically comes with a variety of fuse tap cables to accommodate common fuse types like LP-mini, Mini, and Micro2 blade fuses. This should cover most car models. If you have a less common fuse type, you might need to acquire a specific add-a-circuit adapter.
Leave a Reply